Will the new light steel villa structure house rust? Light steel villa manufacturers tell you in detail! -wellcamp light steel villa manufacturers

Recently, many customers have asked whether light steel villas will rust? You may not have an accurate understanding of the main structure of the light steel villa. The following will introduce to you whether the light steel villa of simple life will rust? First of all, the main structure of the light steel villa is a light steel keel structure. Simple life light steel keel itself has a layer of galvanized layer, the galvanized layer itself can play the role of anti-rust, so what is the galvanized layer? From a microscopic point of view, the process of hot dip galvanizing is two dynamic balances: thermal balance and zinc-iron exchange balance. When the steel workpiece is immersed in molten zinc solution of about 450℃, the workpiece at room temperature absorbs the heat of the zinc solution, and when it reaches above 200℃, the interaction between zinc and iron is gradually obvious, and zinc penetrates into the surface of the iron workpiece. As the temperature of the workpiece gradually approaches the temperature of the molten zinc, alloy layers with different ratios of zinc and iron are formed on the surface of the workpiece, forming a layered structure of the zinc coating. As time goes on, different alloy layers in the coating show different growth rates. From a macroscopic point of view, the above process shows that the workpiece is immersed in the zinc liquid, and the zinc liquid surface boils. When the zinc-iron reaction gradually balances, the zinc liquid surface gradually calms down. The workpiece is lifted out of the zinc liquid level, and when the temperature of the workpiece gradually drops below 200 °C, the zinc-iron reaction stops, and the hot-dip galvanized coating is formed and the thickness is determined. The national galvanizing standard for galvanized steel materials is 60g/m2, and the galvanizing amount for outdoor high-voltage line towers of power companies is 160g/m2 (which can guarantee 50 years of rust in bare environment). The national industry standard stipulates that for highly corrosive areas or special buildings, the amount of galvanizing should not be lower than 275g/m2 or the amount of galvanized zinc should not be lower than 100g/m2, while the material of light steel villa houses is aluminum plated The amount of zinc is 180g/m2, so there is no need to worry about rust and corrosion. So since the aluminized layer has such a function of anti-corrosion and rust, and it is all covered on the surface of the light steel keel, there is no need to worry about rusting. Therefore, the building of the simple life light steel villa manufacturer does not need to worry about rusting. Yes, it won't rust and definitely won't be weak!

Most places have a few choices when it comes to luxury manufactured homes mobile home prices distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of mobile home manufacturers is critical to modern manufactured homes.

Visit GUANGDONG WELLCAMP BUILDING MATERIALS CO., LTD for the best in supplies: WELLCAMP Prefab-House.

If our brand is successful and consistent, it will be much easier to initially grab customers and encourage them to purchase pre manufactured homes further.