Whoever builds the light steel villa will regret it! How many light steel villas produce light steel materials? -wellcamp light steel villa manufacturers

so-called“light steel structure house”, its important raw material is steel structure frame with color material pressure plate, because its steel structure frame is dominated by portal steel frame, so its architectural performance should be based on portal steel frame. Generally speaking, light steel structure houses are recognized by people from all walks of life with their concise and clear characteristics. However, some people will say that this type of house is too soft, unsafe and reliable, and they will definitely regret it if they build it. Today, let us explain the system of light steel houses and the characteristics of light steel structures from a technical perspective. Learn about light steel structures Whether the room is suitable for construction. 01. Floor structure of light steel structure building for simple life The floor of light steel structure building is composed of cold-formed thin-walled steel frame or composite beam, floor OSB structural plate, support points, connectors, etc. The raw materials used are oriented strand board, cement fiberboard, and plywood. On such a light floor, each square meter can withstand a bearing capacity of 316 to 365 kilograms. The weight of the floor structure system of the light steel structure building is only one-quarter to one-sixth of the traditional domestic concrete floor system, but the structural height of the floor will be 100-120mm higher than that of the cement concrete slab. 02. Roofing system of light steel structure building of simple life The roofing system of light steel structure building is composed of roof truss, structural OSB panel, waterproof layer, light roof tile (material or asphalt shingle). The roof of the light steel structure can also have a variety of shapes. Raw materials will also vary. Under the technical premise of ensuring waterproofing, the exterior has many options for implementation. 03. Wall structure of light steel structure buildings for simple life The walls of light steel structure buildings are mainly composed of wall frame columns, wall top beams, wall bottom beams, wall support points, wall panels and connectors. Light steel structure buildings usually use the inner transverse wall as the load-bearing wall of the structure. The wall columns are C-shaped light steel structural members. 400 ~ 600mm, the light steel structure building wall structure placement method can reasonably withstand and safely and reliably transmit the vertical bearing capacity, and it is convenient to place, but the light steel structure building wall structure cannot withstand the horizontal bearing capacity. 04. Insulation and thermal insulation building energy-saving technology of light steel structure buildings for simple life In order to ensure the effect of thermal insulation and thermal insulation, the wall insulation materials used in the exterior walls and roofs of housing buildings can be used for a long time and can be insulated from heat. Keep warm. Light steel structure buildings usually remove the filling of glass fibers between the wall columns, and paste a layer of thermal insulation material outside the walls, which reasonably separates the thermal bridge from the wall columns to the outer wall panels; the joists between each floor are filled with each other. The glass fiber reduces the heat transfer through each floor; the wall columns of all the interior walls are filled with glass fibers to reduce the heat transfer between the household walls. 05. Fire protection specifications for simple living buildings A more important problem in technical light steel structure buildings is the application of fire safety technology. In light steel structure buildings, fire safety gypsum boards are attached on both sides of the wall and the ceiling of the floor. The home walls are protected with 25.4mm thick (1 inch) gypsum board to meet fire safety standards, and non-combustible fiberglass is filled between the wall studs and the floor joists.