What standards should the installation of residential containers meet?1

The residential container is also one of the container houses, which is mainly used to meet some temporary housing needs, which can quickly provide a comfortable living environment and solve the living difficulties of many people. In order to ensure the safety of the use of residential containers and effectively prolong the service life, some relevant standards must be met in terms of installation. Today, Shanghai cabinet family residential container manufacturers will take you to find out.

What standards should the installation of residential containers meet?

First, the installation of steel structural parts must meet the standards, and there must be no omissions in the places that need to be welded, let alone wrong welding, and the welding must be firm in the correct place, otherwise the joints may be weak or even the welds may crack in the later stage;

Second, the wall installation of the box room should pay attention to horizontal and vertical, the caulking should be dense and smooth, the width of the deep and shallow seams should be consistent, and the board surface should not be damaged;

3. If wallpaper needs to be pasted indoors, it is necessary to ensure that the wall is smooth without bubbles, clean and tidy;

Fourth, the assembly of the ceiling should be flat, the gaps should be aligned, the gaps should be consistent, the wallpaper should be clean and tidy, and the board surface should not be broken, and the damaged wallpaper surface should be repaired immediately during transportation;

Fifth, the floor should be laid with ash, and the floor with cracks on the board surface is prohibited from being installed and used again;

Sixth, the surface of the cement or fine stone concrete surface should be pressed tightly, and there should be no cracks, peeling, sanding, hollowing, etc.;

Seven, asbestos tiles must be laid in the leeward according to the characteristics of the local wind direction, and keep the cornice straight, the tiles must not have cracks, the length of the vertical overlap of asbestos tiles should not be less than 100mm, and the horizontal overlap of the middle wave tiles should not be less than one. The wave, the small wave tile should not be less than two waves, each asbestos tile of the tile hook is two fixed points, the tile hook should be properly tightened, and the roof should not leak;

8. The tin gutter joints of the residential container should be welded firmly, and the joints should be treated with anti-corrosion. There should be no accumulation of water or leakage in the gutter.

Nine, the doors and windows are installed accurately and only fastened with bolts.

GUANGDONG WELLCAMP BUILDING MATERIALS CO., LTD, as well, confirms that consumers who want ethically produced goods do the work of looking for them.

Always do our research, follow the rules and plans ahead for additional expenses. Expanding is the goal of GUANGDONG WELLCAMP BUILDING MATERIALS CO., LTD; expanding properly is the goal of the wise business.

On top of making sure all our day-to-day operations are running smoothly, GUANGDONG WELLCAMP BUILDING MATERIALS CO., LTD needs to ensure that we're keeping up with all the quality standards of pre manufactured homes.