What is the structure of the light steel villa? Is the quality of the house good? -wellcamp light steel villa manufacturers

Simple life light steel structure houses not only have the four properties of light, fast, good and economical, but also have the advantages of recyclability and less damage to the environment. It has the advantages of high strength, light weight, good seismic performance, low foundation cost, large construction area, good and high construction, suitable for industrialization and standardized production, dry green construction, suitable for different climatic conditions, not affected by construction seasons It has the advantages of low impact and low comprehensive cost, and at the same time, it can also reduce the pollution of construction waste to the environment. 1. Floor structure Its floor is composed of cold-formed thin-walled steel frame or composite beam, floor OSB structural plate, support and connection structure. The raw materials used are oriented strand board, cement fiberboard, and plywood. On these light-weight floors, each square meter can bear a load of 316-365KG. The total weight of the structural feature system of the floor slab is only 1/4 to 1/6 of that of the traditional concrete floor slab system in mainland China, but the relative height of the structural features of the floor slab will be 100-120mm higher than that of ordinary concrete slabs. 2. Building roofing system Building roofing system is composed of roof truss, structural feature OSB panel, waterproof layer, light roof tile (metal tile or asphalt tile). The roof of light steel structure can have many combinations in appearance. There are also many raw materials. Under the premise of ensuring the technical premise of moisture resistance, the appearance has many plans to provide options. 3. Wall structure features Its wall is mainly composed of wall frame columns, wall top beams, wall bottom beams, wall supports, wall panels and connecting structures. Generally speaking, the inner transverse wall is used as a load-bearing wall of structural features, and the column wall is a C-shaped light steel member. 600mm, this wall structure feature layout method can reasonably and effectively bear and reliably transmit longitudinal loads, and the layout is convenient and fast. 4. Building thermal insulation, energy saving and environmental protection In order to ensure the effect of thermal insulation and thermal insulation, the wall thermal insulation materials used in the exterior walls and roofs of housing buildings can be used for a long time and can be thermally insulated. Generally speaking, in addition to filling glass fiber between the wall columns, a layer of wall insulation material is pasted on the outside of the wall, and the thermal bridge from the column wall to the outer wall panel is reasonably and effectively divided; the joists between each floor Filled with glass fiber to reduce the heat convection according to each floor; all the columns and walls of the inner and outer walls are filled with glass fiber to reduce the heat convection between the walls. 5. Building fire protection specifications An important problem of technical light steel structure villas is the technical application of fire safety, and its fire rating is four. It sticks fire safety gypsum board on both sides of the wall and the ceiling of the floor. Generally speaking, the firewall and household wall are protected with 25.4mm thick gypsum board to meet the fire safety regulations for 1 hour. The glass fiber filled between the wall columns and the floor joists also plays a positive role in protecting against fire safety and thermal convection. 6. Building sound insulation technology It fills the inner and outer walls and the joists of the floor with glass wool, which reasonably and effectively blocks the audio part based on air dispersion, and for the impact sound based on solid dispersion, the following structural treatments are made: For the household wall Two-column walls are used to form two walls with intermediate gaps; for the small keel used to fix the gypsum board for the ceiling, an elastic structure with small grooves is used to reasonably and effectively reduce the solid sound dispersion between floors. It can be recycled in the whole life cycle, etc., and has become the material of villa construction in today's era. In the era of rapid technological development of modern architecture, the construction industry cannot be left behind. Light steel structures are committed to providing basic materials for the construction industry. At the same time, the application of light steel structures in villas has become more and more extensive.