What are the precautions for the use of control cabinets - Special Containers Wellcamp-Professional Container Production

The control cabinet has a long service life, and the built-in voltage stabilization system can effectively adjust and disperse excess pressure, so that the machinery and equipment are in a stable state for a long time. The heat is quickly discharged. In addition, its maintenance is also very important. So, what are the precautions for the use of the control cabinet? The first rack is continuously grounded to ensure the resistance base. Generally speaking, when the rack is in a non-working state, there is still residual micro-current inside the wire. Under the condition of high-voltage attraction, the residual micro-current can be activated and infinitely amplified. For Equipment safety has an important impact, so it is necessary to continuously ground the rack in daily life, and to ensure the resistance base. No random connection of the second voltage clips There are a large number of voltage clips inside the control cabinet, which belong to independent voltage entities, and the work content in charge of each voltage is also different. In order to ensure the safety of the voltage system, the voltage clips must not be disordered. connection to prevent accidents. Third, the contacts should not be in contact with corrosive substances such as dilute hydrochloric acid. Many operators are used to scrubbing with dilute hydrochloric acid or alkaline solvents when using the control cabinet. However, this will cause great damage to the contacts. If the contacts need to be cleaned , it is best to use cotton cloth to wipe, also, do not use abrasive substances to wipe, to prevent contact failure. Fourth, the position of the noise remover cannot be higher than the vibrator. The vibrator does not emit huge noise. It is a sound conduction device for internal devices. The position of the noise remover cannot be higher than the vibrator, otherwise the use effect of the noise remover will be greatly reduced. . The noise remover can be moved up and down, but it should not be moved frequently to prevent damage to the noise device. The above are the precautions for the use of the control cabinet. In addition, its bottom is equipped with a sensing device, which can protect the control cabinet through the acoustic and electrical conductors. In addition, its bottom has a shock-proof pad, which should be avoided with corrosive substances. Contact, which is also the need to pay special attention to the use of the process.