What are the characteristics of the control cabinet - Container House Wellcamp-Professional container production
The control cabinet is widely used in industrial production. Its internal circuits are combined in a tight compression method, and the gap distance between the circuit lines is small, so it can effectively save space and is conducive to handling and transportation. In addition, the U-shaped design It can resist knocking in special environments, so what are the characteristics of the control cabinet? The first cover is separated from the circuit board, and the circuit board under the detachable cover is the most prone to failures. The traditional method of connecting the cover and the circuit board is one-piece. This design method is important to ensure the integrity of the vibration plate. Sex has a certain role, but overall the harm outweighs the benefit, but the control cabinet is freely disassembled, and shock-proof cushions are added around it, which can achieve the best of both worlds. The second load-bearing hinge has a large opening range. The load-bearing hinge of the control cabinet has a large opening range, and the maximum opening range can reach about 150 degrees. The large load-bearing hinge can be better inlaid with the grounding bolt. The occlusion of the patients was significantly improved. The third slide guide rail passage space is large. The slide guide rail passage space of the control cabinet is large. Therefore, even if no space is reserved for the cabinet, the space for the slide guide can be increased to meet the needs. The guide rail is beneficial to the heat dissipation of the cabinet. The fourth sealing ring has a high anti-vibration level. The base of the control cabinet has a shock-proof cushion, which can effectively control the knocking of the control cabinet by the external environment. One of the features, the anti-vibration sealing ring can also prevent the internal accessories from being dislocated or falling off. Fifth, double-layer filter screen to prevent clogging The filter screen of the control cabinet adopts the method of double-layer filtration, which can effectively prevent internal clogging. The above are the characteristics of the control cabinet. In addition, it has fewer external link points, and does not require additional pressure or multi-circuit connections. It only needs to be inserted freely according to the direction of the electrical port and the magnitude of the current. Therefore, the control cabinet's The installation is very convenient, and at the same time, it is also very convenient to move and change the machine.