Regional Characteristics of Container Houses - Container Size Specifications Wellcamp-Professional container production

Perhaps in the industrial society, standardization and industrialization have become a trend, and the industrialization of housing and container modular houses have been widely discussed around the world. In Europe and Japan, container modular houses have been applied in the middle of the last century. Since the beginning of the new century, China's huge demand for housing and tourism housing, with the research and implementation of housing boxes, modular housing, and industrialized housing, whether it can alleviate the sensitive housing nerves of the Chinese people is still unknown, but at least it is certain The thing is, with the development of new materials and new processes, modular box houses or modular buildings will perform a wonderful future in the application fields mentioned above. At least in developed economies, it is no longer a low-end residential term. . ⒈ In severe cold areas, the requirements for thermal insulation in winter should be met. In some areas, when it is necessary to take into account the heat protection in summer, it should also be considered that the structure of the container module house should be designed as an external thermal insulation (thermal insulation) structure. ⒉ Areas with hot summer and cold winter should meet the requirements of heat-proof structure in summer, and try to take into account the heat preservation in winter. ⒊ In areas with hot summers and warm winters, the requirements for heat protection in summer should be fully met. In the northern area, the effect of thermal insulation in winter should be taken into account as much as possible. The container module house must be designed with an external shading structure. ⒋ In areas with thermal insulation requirements, each part of the container module house structure shall meet the heat transfer coefficient limit requirements specified in the energy-saving design standards for buildings of this category. The dew point check shall be carried out for the envelope structure of the heating area, and measures shall be taken if it is not satisfied. ⒌For areas that require heat protection, when adopting a lightweight container modular house structure and the D value fails to meet the requirements, comprehensive measures such as shading, ventilation, reflection, etc. should be taken in time. For container modular houses of certain building types, when a building combination scheme with exposed box structure is adopted, a complete container should be used, and the outer surface should be intact. When the container wall panel is used as the outer wall surface, the internal link should be welded and the fasteners of the iso-fastening part should not penetrate the container wall. Due to the limitation of the pipeline structure, it is difficult to change the position of the kitchen, bathroom, etc. during use. Therefore, the key layout of indoor functions is easily affected. When the container modular house is combined with a container and a bottom frame or a partial frame, it should be noted that the structural and functional requirements outside the container part should be coordinated with the box enclosure, and achieve The requirements of the relevant standards of the current country.