How to effectively prevent moisture in the resident mobile room

Moisture-proof is a major problem in the movable room. Because some of them are made of cotton cores, the problem of moisture-proof must be solved well. In fact, a good moisture-proof effect should be built on the wall of the movable room. Therefore, the relevant experts put forward the following points for attention in view of this shortcoming of the mobile house:

How to effectively prevent moisture in the resident mobile room

1. Close the glass wool and install the color steel plate on the wall;

2. With the veneer facing the indoor side, unwind from the eaves to the corner of the wall, and use double-sided tape to fix the glass roll felt on the bottom purlin, leaving an extra 20 cm;

3. The horizontal connection of cotton and cotton is connected together by the method of binding with a stapler on the veneer flash.

4. Cut off the glass wool roll felt 20 cm above the purlin on the top of the wall, and fix it with double-sided tape.

In addition, according to the needs of the project during the construction of the mobile house, in order to avoid the occurrence of cold bridges, the roof construction can consider padding some hard thermal insulation materials on the purlins.

During installation, the tension and alignment of the glass wool roll felt should be maintained, and the joints between rolls should be tight. When longitudinal overlap is required, the overlap should be arranged at the purlin.