How is the equipment container repaired? - Container house Wellcamp - professional container production
It is very common for the equipment container to be damaged in some places during the long-term use, but if it is to be put into use again, it must be well repaired, and after the repair, it must be ensured that it reaches a certain strength and firmness. So how to repair damaged equipment containers? 1. Choose the right adhesive. Although good quality equipment containers are better in terms of durability and firmness, long-term loading of various large and heavy equipment will still have an impact on some of the components. When the four strokes are cracked, it is necessary to use a professional adhesive for repair. When repairing, adhesives such as epoxy, neoprene, and sealant can be used to firmly bond the repair material to the equipment container where the repair is required. 2. Use backing plate for welding. If the ground beam and other parts of the equipment container are damaged and need to be repaired by welding, in order to avoid being burned through during welding, a steel plate should be used as a backing plate and placed on the The back of the welding part, so as to play a protective role. 3. The use of caulking to increase the water tightness of equipment The container has relatively high requirements on water tightness, and its tightness will gradually decrease during long-term use, so corresponding repair measures should be taken to remedy it. Then you can use paint putty, putty hemp silk caulking, rubber caulking and other materials to fill various gaps. Including the joints, seams, edges of the wooden floor, side walls and gaps between the end frames of the equipment container, where the gaps in the floor of the equipment container are filled with paint putty or putty hemp caulking. The above is the method of repairing the equipment container. No matter how good the quality of the best equipment container is, there will be more or less small problems after long-term loading of heavy and large equipment. In order to improve the utilization rate of the container, it is necessary to carry out reasonable maintenance on the equipment container with abnormal conditions. Put it into use when its firmness and water tightness meet the requirements.