Do you know how the living container is installed?

Residential containers are one of the container houses, mainly used for living in box-type houses, which can quickly meet some temporary housing needs. After years of material optimization and technological innovation, the comfort of living containers can be comparable to traditional housing. , which can bring people a more comfortable living space. So do you know how the living container is installed? Today Wellcamp will take you to find out.

1. The living container is similar to building a building. Level the surrounding and the foundation of the partition walls. According to the construction drawing of the living container foundation, dry the construction foundation for at least three days. Lay ground beams on the inner side of the line, use explosive bolts to connect, and set up columns at each connection corner of the ground beams and in them. It should be noted that double inclined columns should be set up on both sides of the gable of the slab house.

Second, assemble the wall on the ground according to the various views of the construction drawing, riveted the aluminum ground buckle groove at the bottom with 5.2 rivets, cut out the position of the doors and windows according to the position of the construction drawing, and riveted the aluminum frame, It should be noted that the plate and the plate are not riveted first, but only tiled and assembled, nailed the position of the door and window and riveted the aluminum frame of the door and window.

3. According to the floor plan of the house design, erect the assembled boards one by one at each position, use rivets to rive between the boards, and use arc aluminum riveting to connect the outer corners.

Four, according to the large wave tile distribution map in the construction drawing of the residential container, cover the completed entity with large wave tiles one by one, and use 75 self-tapping screws to connect them.

Fifth, riveted roof tiles on the ridge of the living container, connected the gable to the gable closure, and connected the front and rear eaves to the sink, all riveted with rivets. The flat roof type has no ridge and ridge tiles. Finally, glass glue is applied to every gap and rivet of the house roof, and glass glue is applied to the gaps of the exterior wall and around the windows.

The above is the introduction of the overall installation steps of the residential container. You can refer to it. Only by strictly following each step of the installation can the stability and quality of the house be guaranteed, thereby ensuring the service life of the house.

Guangdong WELLCAMP BUILDING MATERIALS CO., LTD is fully committed to supplying high quality products and services.

Guangdong WELLCAMP BUILDING MATERIALS CO., LTD looks forward for the meeting and the association with your esteemed company.

Being focused on the goals of mobile home prices, our team, and most importantly, ourselves is critical to long-term success.

Guangdong WELLCAMP BUILDING MATERIALS CO., LTD has an excellent staffs who will guide you with their best ideas by keeping in constant touch with your company and informing about the market trends.