Container office is a new type of activity room
The container office is a new type of activity room that introduces modern home design concepts. It is an integrated activity room that is refined by standard technological processes using steel plates, sandwich panels, bolts, aluminum accessories, concrete, wood, ceramic tiles, glass, paint and other materials. , It has the characteristics of ready-to-use, mobile anytime, anywhere, recycling, recycling, safety, environmental protection, beautiful, economical, fast and efficient. Construction requirements 1. Gray line stakeout: Measure according to the location of the floor plan of the living area. 1) Residential container components The installation position of each component should meet the design requirements, and the location of the on-site welding parts should be accurate, and there should be no false welding or missing welding. 2) Fasteners a. Fasteners should meet the requirements of GB5782. b. Bolts must be installed in the correct position and with gaskets in accordance with the design requirements. There must be no missing or missing installations. C. The connecting bolts between the components must be tightened. 3) Paint a. The place where the primer peels off during on-site welding and transportation should be painted with a layer of anti-rust paint. b. The exposed parts of the components should be painted with a second layer of top paint. The paint shall not have the phenomenon of missing brushing, peeling, hanging paint and returning rust. 4) Wall a. Rank the container office and the wall in the top block according to the layout plan. The corners and external corners of the umbrella wall are sealed with angle aluminum. The connection between the board and the board is made of I-shaped aluminum. The wall must be vertical, the caulking depth should be consistent, neat and clean, the wall should be clean, the color should be the same, the board seam should be neat, the nailing surface should be consistent up and down, and there should be no dislocations, and the necessary parts should be self-tapping bolts. b. Mark the position of the doors and windows of the container meeting room according to the design drawings, cut out the position of the door and window holes with a cutting machine, install the windows and doors according to the position of the door and window holes, and the windows are plastic steel windows.